rod chemistry

This cylinder has been produced in the advanced industrialized countries during the last few years and used with the brand of rod chemistry.

Rod chemistry is a thick copper or steel pipe which has been coated using atomization method, and in fact, replaces the ground rod or plate.

Rod chemistry is produced using a pipe with a diameter of 2 to 20 inches and a length from 0.8 to 6.6 meters and in two forms of column and X. Then, it will be charged by the electrolyte. In the cases of less than five inches in diameter, to increase contact area of ​​the electrodes, the steel side blades coated by atomized copper are used.

Advantages of rod chemistry:

1. Creating a large contact area with the ground and therefore, low resistance and high discharge capacity than other types of earth electrodes;
2. Permanent recharging of electrolyte and water into the earth, and therefore, gradually reducing the electrical resistance of the ground and maintaining it in the long time;
3. Stable remaining of ability and healthy of the system for a very long time;
4. Creating a hemisphere of resistance reducing, much better than other systems;
5. No need to control, recharge or repair of the well over a period of several years;
6. Usable and applicable in all the grounds having various electrical resistance.